Cabinet Knob Placement

Cabinet hardware is a finishing touch that elevates a room from so-so to stunning. Cabinet knob placement is important for more than aesthetics because proper placement is necessary for the function. Learn all about cabinet knob placement, so you can get your room’s look just right! Kitchen cabinet knob placement has been knobs for cabinet doors and pulls for drawers.

  • For upper cabinets: Cabinet knobs should be installed on the stile opposite the hinges and in the bottom corners of the door. The most functional and aesthetically pleasing place to install knobs on cabinet doors is anywhere between 1 Inch and 4 inch from the bottom edge of the door.
  • For lower cabinets: It will be the opposite – the top screw will be about 1 inch to 4 inch from the top edge corner of the door. Pulls should be installed on the stiles of the doors, so adjust your measurements if they’re falling on the rails or panels.
  • For the cabinet drawers: Knobs should be centered on cabinet drawers. Typically, knobs are centered both horizontally and vertically, so they will end up being installed in the center of the panel. For extra deep drawers, you may install knobs centered in the top third of the drawer or on the top rail if you prefer. 

Knowing the design rules for cabinet knob placement will help you create stunning spaces in your home. Visit our website at https://ivanhardware.com/en-US/products/zinc-handles for more details of cabinet knobs and contact us via a hotline 1800 6943 for advice.

Other news

  • What is a cabinet door overlay?
    19 08/2021

    What is a cabinet door overlay?

    The overlay of cabinet Doors/drawer fronts refers to the construction and fit of your cabinet doors in relation to the cabinet frame.

  • What is zinc alloy?
    17 08/2021

    What is zinc alloy?

    After iron, aluminium and copper, zinc is the fourth most widely used metal in the world. Aside from being used for galvanization, it is used to make alloys - a substance with greater strength and resistance to corrosion by adding other metals (aluminum, copper, magnesium and iron) into the mixture. 

  • What is the manufacturing process of a IVAN's ball bearing slides?
    14 05/2021

    What is the manufacturing process of a IVAN's ball bearing slides?

    IVAN’s ball bearing slides are consumed in a large quantity by the factory because of its stable quality. The manufacturing process of IVAN ball bearing slides goes through the following stages

  • How IVAN's concealed cabinet hinges are made?
    06 05/2021

    How IVAN's concealed cabinet hinges are made?

    The cabinet hinges are used in kitchen cabinets and other interior cabinets such as wardrobes, office cabinets. IVAN’s cabinet hinges are favored by furniture factories and consumed in large quantity every month because of these stable quality.

  • Choose kitchen cabinet handles for industrial stype
    19 03/2021

    Choose kitchen cabinet handles for industrial stype

    Industrial style is a style that evolved in the early 20th century. Industrial interior design is raw, almost unfinished, providing a casual atmosphere that's relaxing to live in.